TM9-2330-376-14&P
4 - 4 9 . SPARE TIRE CARRIER MAINTENANCE (Con't).
4.
Remove bolt (19), pawI (2), and two flatwashers (20) from frame.
Remove two nuts (23) and U-bolt (15). Remove wire rope (12) from shaft (16).
5.
Remove two nuts (24) and clamp (25) from mounting bracket (26). Pull wire rope (12) from mounting bracket.
6.
7.
Remove cotter pin (8) and two flatwashers (9) from shaft (16). Discard cotter pin.
Turn shaft(16) to provide access to two setscrews(11 and 14). Remove two setscrews from collars (10 and 13).
8.
On XM1073, remove nut (21), Iockwasher (22), and screw (18) from flange (17). Discard Iockwasher.
From rear of trailer, pull shaft(16) at ratchet end out. Collars (10 and 13) and flange (17) (XM1 073) will slide off as
9.
shaft is removed.
b.
ASSEMBLY
From rear of trailer, install shaft (16) halfway.
1.
2.
Slide two collars (13 and 10) and flange (17) (XM1073) onto shaft (16).
4-92
