TM 9-2330-376-14&P
4 - 4 9 . SPARE TIRE CARRIER MAINTENANCE (Con't).
3.
Slide shaft (16) completely in and through frame. Install two flatwashers (9) and new cotter pin (8).
Position collars (10 and 13) and install setscrews(11 and 14). On XM 1073, install screw (18), new Iockwasher
4.
(22), and nut (21) to secure flange (17).
Thread wire rope (12) through hole in shaft (16) and groove in collar (13).
5.
Install U-bolt (15) through shaft (16), over end of wire rope (12), with two nuts (23).
6.
7.
Thread other end of wire rope (12) through mounting bracket (26) and clamp (25). Install clamp with two nuts
(24).
8.
Install two flatwashers (20) and pawl (2) with bolt (19).
Hook spring (1) to pawl (2) and frame.
9.
10.
If removed, install latch (3) and spring (4) with washer (5) and bolt (6).
11.
Return handcrank (7) to stowed position.
FOLLOW-ON TASKS:
Lubricate spare tire carrier (Chapter 3, Section l).
Stow spare tire (para 2-14).
4-93
