TM 9-2330-381-14
Table 2-1. Operator/Crew Preventive Maintenance Checks and Services
B-Before Operation
D-During Operation
A-After Operation
W-Weekly
Equipment
Item
Interval
ITEM TO BE INSPECTED
is not ready/
no.
B
DA
W
Procedure
available if:
17
SUSPENSION SYSTEM
CAUTION
If mud or debris builds up in the lower
suspension arm, it must be cleared or damage
to the brake air lines will result.
If brake dust cover or brake chamber dust
plugs are distorted or missing, hole should be
covered with tape or other temporary means
until dust plug can be replaced or damage to
equipment may result.
NOTE
The suspension system consists of 10
assemblies which require multiple point
inspections each time a component/item is
encountered.
a. Inspect upper and lower suspension arms (49), axle
Any damage or Class III
(50), dual wheel assemblies (51), suspension cylinder
leaks.
(52), dust covers (53), and service/parking brake
chamber (54) for leaks, damage, missing parts, and
buildup of mud or debris.
Change 3 2-35
