TM 9-2330-381-14
d. To raise rear support leg, proceed as follows:
(1) Release latch (1) and raise protective cover (2) to gain access to adjusting nut (3).
(2) Using a speed wrench, adapter, and 1-5/8-inch socket, turn adjusting nut (3) clockwise to raise support leg
(4).
CAUTION
Ensure that socket head screw is positioned outboard and cover closes freely or
damage to equipment may result.
(3) Raise support leg until foot (5) contacts bottom of tube weldment (8). If necessary, turn adjusting nut (3) back
counterclockwise to position socket head screw (6) outboard.
Change 1 2-71