TM 9-2330-381-14
(59) Winch operator must pull up on both DRIVERS SIDE WINCH lever (35) and PASSENGER SIDE WINCH
lever (23) to pull payload slightly forward off of rear payload chocks (39). Remove both rear payload chocks
(39).
NOTE
It may be necessary to pull the first set of road wheels onto front payload chocks
before payload will roll back on its own.
(60) Winch operator must push down on both DRIVERS SIDE WINCH lever (35) and PASSENGER SIDE WINCH
lever (23) and allow payload to roll off of semitrailer. Cables may be payed out unevenly to maintain
directional control.
(61) Once payload clears curb guides, ensure that it rolls straight down ramps.
WARNING
Prior to removing winch cable from payload, winch operator must be sure the
winch cables have enough slack to relieve tension in the cable or injury to
personnel may result.
(62) Winch operator must continue to pay out both winch cables (24 and 36) until cables are touching platform.
Release levers (23 and 35).
Change 1 2-159
