TM 9-2330-381-14
WARNING
Because the snatch block is heavy, two persons are required when handling the
snatch block or injury to personnel say result.
(28) Using two persons, remove linch pin (14) and keeper pin (15) from snatch block (2). Open snatch block (2)
and remove cable (11) from snatch block. Close snatch block (2), re-install keeper pin (15), and secure with
linch pin (14).
WARNING
Extreme caution must he used when removing winch cable from curbside
gooseneck fairlead. Cable may be under tension or be twisted. Do not allow cable
to twist or whip freely or injury to personnel may result.
(29) At curbside gooseneck fairlead (16), disconnect clevis end of winch cable (11) from gooseneck fairlead
attaching point.
(30) Remove two shackles (9), snatch block (2), and two Y-bar straps (8) from payload. Remove pin (5), nut (6),
bolt (7), and snatch block (2) from two Y-bar straps (8).
2-175