TM 9-2330-381-14
2-28.
SINGLE WINCH LOADING AND UNLOADING (U.S.M.C. ONLY) (CONT)
(28) Using two persons, remove winch cable (11) from under pivot pin sheave (28).
(29) Remove linch pin (14) and keeper pin (15) and open snatch block (2). Using two persons, pass winch cable
(11) through snatch block (2).
(30) Close snatch block (2) and re-install keeper pin (15) and linch pin (14).
(31) Winch operator must pay out winch cable (11) and connect winch cable (11) to curbside gooseneck fairlead
(16). Install bolt (11.1), nut (11.2), and retainer (11.3).
(32) Winch operator must take up slack in winch cable (11) and maintain tension on cable while platform height is
adjusted.
(33) Start APU (para. 2-16).
2-196 Change 1
