TM 9-2330-381-14
2-33.
BRAKE CAGING/UNCAGING (CONT)
k. Reinstall dust plug (5) into opening in top of brake chamber (4). Make sure dust plug is properly seated in brake
chamber.
NOTE
Make sure the caging bolt is returned to its stowed position on the brake chamber
with the key end properly positioned.
l. Insert caging bolt (3) back into stowed position on brake chamber (4) and secure in place by installing washer (2)
and nut (1).
2-34.
OPERATION WITH DISABLED BOGIE
CAUTION
The tractor/semitrailer combination, either loaded or unloaded, is limited to
operating with only one disabled bogie. The following procedure specifically
identifies how to prepare the semitrailer for transport. If this procedure is not
strictly followed, severe damage to equipment may result.
a. Refer to paragraph 2-33 and cage brakes at affected bogie.
b. Lower platform (para. 2-19) until suspension (bogie) is completely compressed.
c. Loosen and turn adjustment nuts (1) on eyebolts (2) until nuts (1) are threaded all the way down threaded portion
of eyebolts (2).
2-216
