TM 9-2330-381-14
3-8. OUTER/INNER WHEEL
This task covers: a. Removal b. Installation
INITIAL SETUP
Tools
Socket wrench handle (ratchet), 3/4-inch drive, item 15, appx. C
8-inch extension, 3/4-inch drive, item 12, appx. C
Socket (lug), 1-1/2-inch hex and 13/16-inch square nuts, 3/4-inch drive, item 25, appx. C
Suspension chain, item 10, appx. C
Metallic tube, item 6, appx. C
Personnel Required: 2
Equipment Condition
Outer/outer wheel removed (para. 3-7)
If necessary, spare tire removed (para. 3-6)
NOTE
Wheel removal/installation is divided into four separate procedures. Refer to
diagram for location, wheel designation, and thread types. Within each procedure,
notes will identify wheels, and right-hand left-hand lug nuts or lug studs.
3-45
