TM 9-2330-381-14
CAUTION
Ensure that hydraulic and air brake lines are securely mounted on bogie or
damage to equipment may result.
11.
Check that two hydraulic lines (16) and air brake lines (17) are not chafed, broken, or missing any electrical
tiewraps at affected bogie (5). If any defects exist or items are missing, notify unit maintenance.
12.
Continue to move bogie (5) as required until linkage attaching point on bogie (5) is approximately alined with
connecting link (4).
13.
For #1 bogie only, aline and install preformed packing (6) onto bogie (5).
14.
Remove safety pin (1) and nut (2) from capscrew (3). Aline and install connecting link (4) onto linkage attaching
point on bogie (5). Secure in place by installing capscrew (3) and nut (2).
3-55
