TM 9-2330-381-14
NOTE
There may be one or more loop clamps stacked onto one weld stud. Note the
orientation of the clamps prior to removal so that all clamps can be properly
reinstalled.
35.
Remove nut (109), lockwasher (110), and loop clamp (111) from weld stud. Discard lockwasher.
36.
Remove six nuts (112), lockwashers (113), and loop clamps (114) from weld studs. Discard lockwashers.
37.
Remove two pipe-to-tube elbows (115 and 116) from platform (air tank) weldment.
Install caps/plugs into
openings.
Change 1 4-225
