TM 9-2330-381-14
4.
Remove cotter pin (10) from slotted nut (11). Using a 3/4-inch ratchet, 1-1/8-inch socket, and 1-1/8-inch
combination wrench, remove slotted nut (11) and capscrew (12) from connecting link (5) and rigid platform mount
(13). Discard cotter pin.
5.
Using a prybar, pry end of connecting link (5) up and out of linkage attaching point on rigid platform mount (13).
Remove preformed packing (14). Discard preformed packing.
6.
Remove sleeve bushing (15), ring spacer (16), and preformed packing (17) from connecting link (5). Discard
preformed packing.
4-245
