TM 9-2330-381-14
4-67. COVERS (CONT)
4.
Aline and install rear panel (11) onto hydraulic control module frame (8) and secure with three lockwashers (10) and
screws (9).
5.
Using two people, aline and install lower panel (5) onto hydraulic control module frame (8) and secure with six
lockwashers (7) and bolts (6).
6.
Aline and install door panel (3) with lower panel (5) and secure with two screws (4).
7.
Install cotter pin (1) onto door panel (3). Close door panel (3) and rotate hasp (2) to secure in place. Install cotter
pin (1) onto hasp (2).
4-68. DEFLECTORS
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
Materials/Parts
Locknut (8)
Lockwasher (8)
Equipment Condition
Tractor/semitrailer uncoupled (para. 2-24)
NOTE
The following procedure is to be used for either curbside or street-side deflectors.
Repeat this procedure as required to complete the necessary repairs.
REMOVAL
1.
Tag and disconnect electrical leads from clearance lights on deflector and access cover.
2.
Remove four capscrews (1) and lockwashers (2) which secure access cover (3) to deflector (4).
Discard
lockwashers.
3.
Separate access cover (3) from deflector (4) and remove clearance lights from access cover and deflector (para.
4-324 Change 3
