TM 9-2330-381-14
4-81.
VALVE HANDLES (CONT)
REMOVAL - CONFIGURATION B
1.
Push back on ears of clip (1) and unsnap from clevis (2).
2.
Remove clip (1), pin (3), and handle (4) from valve (5).
INSPECTION - CONFIGURATION B
Inspect valve handles for cracks, wear, and corrosion. If corroded, clean as required. If defective, replace as required.
INSTALLATION - CONFIGURATION B
1.
Install handle (4) to valve (3) and insert pin (3) into side of clevis (2) with head of pin in recess in clevis.
2.
Insert pin or clip (1) into clevis (2) and rotate clip until ears on pin snap in place on clevis (2) and capture pin (3).
4-398.2 Change 1
