TM 9-2330-381-14
3.
Remove two cotter pins (6), straight shouldered pin (7), and rigid connecting link assembly (8) from platform.
Discard cotter pins.
4.
Remove two cotter pins (9), straight shouldered pin (10), and steering tie rod assembly (11) from platform.
Discard cotter pins.
5.
Remove two self-locking bolts (12), washers (13), clamp bridge (14), and manual control lever (15) from two ball
valves (16). Discard self-locking bolts.
6.
Remove capscrew (17), washer (18), and setscrew (19) from manual control lever (20).
7.
Using a suitable prying device, pry up and remove manual control lever (20) from ball valve (21).
8.
Remove two self-locking bolts (22), washers (23), clamp bridge (24), and manual control lever (25) from two ball
valves (26). Discard self-locking bolts.
4-409
