TM 9-2330-381-14
4-89. HYDRAULIC FILTER (CONT)
2.
Using a drain pan, tag and disconnect two hydraulic tubes (9) from straight pipe-to-tube adapters (10) on
hydraulic filter (11).
3.
Remove two bolts (12), lockwashers (13), and hydraulic filter (11) from hydraulic control module (4). Discard
4.
Remove two straight pipe-to-tube adapters (10) and two preformed packings (14) from hydraulic filter (11). Install
caps/plugs into all openings. Discard preformed packings.
5.
If hydraulic filter (11) needs to be disassembled, proceed as follows:
a. Using a drain pan and 1-1/4-inch wrench, unscrew and remove filter element housing (5) from filter block (6).
b. Remove filter element (7) and preformed packing (8). Discard filter element and preformed packing.
c. Pour fluid inside of filter element housing (5) into drain pan.
4-438
