TM 9-2330-381-14
Materials/Parts
Cap and plug set, item 5, appx. E
Pipe sealant, item 18, appx. E
Wiping rag, item 19, appx. E
Dry cleaning solvent, item 26, appx. E
Lockwasher (8)
Preformed packing (2)
Gasket
Personnel Required: 2
Equipment Condition
Gooseneck steps removed (para. 4-56)
Battery removed (para. 4-30)
APU hydraulic lines removed from hydraulic tank (para. 4-86)
General Safety Instructions
WARNING
Hydraulic fluid may be absorbed through the skin. Avoid prolonged exposure to
skin and wear long sleeves, gloves, and goggles or face shield. If hydraulic fluid
gets into the eyes, flush them immediately with water and seek medical attention.
If hydraulic fluid gets on skin, wash thoroughly with soap and water. Wash hands
thoroughly prior to eating or smoking.
Hydraulic fluid may be hot if system has been in operation. Allow time for system
to cool before performing maintenance or injury to personnel may result.
CAUTION
All fittings and openings must be capped or plugged immediately after opening to
prevent dirt, moisture, or foreign material from entering the hydraulic system or
damage to equipment may result.
4-471
