TM 9-2330-381-14
CAUTION
Use caution when removing fan belt so as not to lose or catch belt lock pins in the
flywheel or flywheel housing or damage to equipment and unnecessary work may
result.
2.
Using two people and manual handcrank, slowly turn motor over while carefully prying belt (4) off of fan pulley
with screwdriver.
3.
Turn two locking tabs (5) 90 degrees so that tabs are parallel with belt (4). Pry top layer of belt off of one locking
tab. Pry remaining belt layer off of two locking tabs.
4.
Remove belt (4).
ADJUSTMENT
1.
If belt has excessive play from previous inspections, belt must be adjusted.
NOTE
Recommended belt length is 43 links. Inside of belt points to the direction of travel
of the belt.
2.
Turn one tab and pry one link off of belt if necessary.
4-517
