TM 9-2330-383-14&P
REMOVAL
a. On old trailers with serial numbers 2000 and below, at rear brake only,
remove two nuts (1), clamp (2), U-bolt (3), nut (4), lockwasher (5), bolt
(6), and bracket (7).
b. Remove four screws (8) and lockwashers (9); then remove cam bracket assembly
(10).
c. Remove two washers (11) and two bushings (12) from cam bracket assembly (10).
d. On old trailers with serial numbers 2000 and below, remove eight nuts (13),
lockwashers (14), and screws (15) and remove spider (16) and deflector (17)
from spindle (18).
d.1. On new trailers with serial numbers 2001 and up, remove seven (on front
brakes, eight on rear brakes) nuts (13), lockwashers (14), and screws (15)
and remove spider (16) and deflector (17) from spindle (18).
e. Remove five screws (19) and separate spider (16) and deflector (17).
f. On new trailers with serial numbers 2001 and up, remove grease fitting (20)
and plug (21).
Change 1
4-29
