TM 9-2330-383-14&P
b. Remove cotter pins (5), nuts (6) and short tie rod (1) from assembly arm (7)
and towbar pivot (8).
c. Unscrew and remove short tie rod ends (9).
d. Remove clamps (4).
e. Loosen, but do not remove, nuts (10) holding clamps (11) on long tie rod (2).
f. Remove cotter pins (12), nuts (13) and long tie rod (2) from assembly arms
(7).
g. Unscrew and remove long tie rod ends (14).
h. Remove clamps (11).
INSTALLATION
a. Install clamps (11) on each end of long tie rod (2) (do not tighten).
b. Install tie rod ends (14) onto long tie rod (2).
c. Position clamps (11) and tighten nuts (10).
4-63
