TM 9-2330-383-14&P
INSTALLATION
CAUTION
Do not over-tighten or reflector will crack.
Position reflector (5) and secure with two screws (4), washers (3), lockwashers (2)
and nuts (1).
END OF TASK
4-46. DATA PLATES
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
General mechanics tool kit
Blind head riveter
Materials/Parts
Rivets
REMOVAL
Remove pop rivets to detach any defective identification plate, service/emergency
tag, instruction plate, lubrication plate, or certification plate.
INSTALLATION
Install identification plate, instruction plate, lubrication plate, service/
emergency tag, and certification plate with pop rivets.
END OF TASK
4-95/(4-96 blank)
