TM 9-2330-383-14&P
NOTE
Do not allow streetside bolt to rotate while torquing.
m. Torque streetside hanger nut (13) to 740-750 lb ft.
n. Torque curbside hanger bolt (12) to 740-750 lb ft.
o. Install short tie rod (para. 4-28). Install leveling valve rod (para. 4-40).
p. Weld new lock rings (9 and 10) onto hanger bolts (11 and 12).
q. Install wheels (para. 3-5).
r. Apply anti-seize tape to threads and reconnect air hoses to brake chambers
and air bags.
END OF TASK
5-5. TORSION BARS
This task covers:
a. Removal
c. Inspection
b. Cleaning
d. Installation
INITIAL SETUP
Tools
Equipment Condition
General mechanics tool kit
Sway bar removed (para. 4-42)
Torque wrench
Shocks removed (para. 4-41)
Cutting torch
Air bag removed (para. 4-39)
Impact wrench
Tie rods removed (front only)
Hydraulic jack (2)
Drift punch
Axle removed (front or rear)
Assembly tool (figure G-3)
(para. 5-4, 5-6)
(for rear streetside)
Materials/Parts
Hanger bolt lock ring (4)
NOTE
Front and rear torsion bars are identical. Front installation is shown.
5-7
