TM 9-2330-384-14&P
Section II. PREVENTIVE MAINTENANCE CHECKS
AND SERVICES (PMCS)
Paragraph
Page
Title
Number
Number
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Intervals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reporting Repairs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General PMCS Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specific PMCS Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning Agents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Leakage Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 2-1 Operator Preventive Maintenance Checks and Services (PMCS) . . . . . . . .
2-3. GENERAL.
a. To ensure that the M1062 7500 Gallon Fuel Tank Semitrailer is ready for operation at all
times, it must be inspected on a regular basis so that defects may be found before they result in
serious damage, equipment failure, or injury to personnel. This section contains systematic
instructions on inspections, adjustments, and corrections to be performed by the operator.
b. Before performing PMCS, read and follow all safety regulations found in Chapter 1, Section
IV, General Safety Regulations.
2-4. INTERVALS.
Perform PMCS, found in Table 2-1, at following intervals:
Perform Before (B) PMCS just before operating semitrailer.
Perform During (D) PMCS while operating semitrailer.
Perform After (A) PMCS right after operating semitrailer.
Perform Weekly (W) PMCS once each week.
Perform Monthly (M) PMCS once each month.
2-5. REPORTING REPAIRS.
All defects which the operator cannot fix must be reported on DA Form 2404, Equipment
Inspection and Maintenance Worksheet, immediately after completing PMCS. If a problem is found,
report it to unit maintenance IMMEDIATELY.
2-6. GENERAL PMCS PROCEDURES.
a. While performing PMCS procedures, always keep in mind CAUTIONS and WARNINGS.
b. While performing specific PMCS procedures, ensure that items are correctly assembled,
secure, serviceable, and adequately lubricated as defined below:
(1)
An item is CORRECTLY ASSEMBLED when it is in proper position and all parts are
present.
2-6