TM 9-2330-384-14&P
4-21. TURN SIGNAL/TAILLIGHT MAINTENANCE (Con"t).
c. INSTALLATION
WARNING
When performing electrical maintenance, ALWAYS disconnect inter-
vehicular electrical cable from semitrailer. Failure to follow this warning
may create a spark and explosion, resulting in serious injury or death to
personnel.
NOTE
Ensure that all wire connections are made to clean, uncorroded surfaces.
Coat all wire connections with corrosion preventive compound before they
are made.
(1)
If removed, install new gasket (3). Install turn signal/taillight (11) to light box (1) with four
screws (6).
NOTE
Curbside turn signal/taillight (11) has a green wire instead of a yellow
wire (12).
(2)
Connect yellow wire (12) with new connector (14). Connect four black wires (2 and 13) with
new connector (15). Crimp connectors.
(3)
Install stop/taillight (5) with four screws (4).
FOLLOW-ON TASKS:
Connect intervehicular electrical cable to semitrailer (see paragraph 2-12).
Check operation of light (see TM 9-2320-273-10 or TM 9-2320-283-10).
4-55
