TM 9-2330-384-14&P
4-29. ELECTRICAL CONDUIT AND WIRES REPLACEMENT (Con't).
(6)
Cut any excess length of electrical conduit (1). Install electrical conduit at other end.
(7)
Connect wires (4) at each end of electrical conduit (1). as tagged, with new connectors (5):
(a)
If electrical conduit at front of semitrailer was replaced, install new terminals (3) on
wires and connect to circuit breaker posts in voltage control unit (2).
(b)
If cover of condulet (7) at side clearance and marker light (6) was removed to gain
access to connectors inside condulet, install cover (see paragraph 4-25).
4-85
