TM 9-2330-384-14&P
4-28. TRIPLE CLEARANCE LIGHT ASSEMBLY REPLACEMENT (Con't).
CAUTION
Use caution not to damage lens (9).
Carefully use a screwdriver to lift lens (9) and remove.
(1)
Cut connector (3) from black wire (5) and two brown wires (2). Discard connector.
(2)
Remove two screws (10) closest to conduit (6). Lift triple clearance light assembly (1) away
(3)
from semitrailer enough to allow tool to be placed on nut (7).
Loosen nut (7) at straight adapter (8) and disconnect conduit (6) from triple clearance light
(4)
assembly (1). Remove black wire (5) from triple clearance light assembly.
Remove four remaining screws (10) and triple clearance light assembly (1) from semitrailer.
(5)
If damaged, remove three gaskets (4) and discard.
Remove straight adapter (8) from triple clearance light assembly (1).
(6)
b. INSTALLATION
WARNING
When performing electrical maintenance, ALWAYS disconnect inter-
vehicular electrical cable from semitrailer. Failure to follow this warning
may create a spark and explosion, resulting in serious injury or death to
personnel.
(1)
Install straight adapter (8) to triple clearance light assembly (1).
4-80