TM 9-2330-384-14&P
4-31. AXLE ALINEMENT (Con't).
(9)
With front axle (3) alined, measure distance "C" between flat face of front axle and fiat face
of rear axle (4), outboard of U-bolts (6). Measure distance "D" in same manner, Distances
must be within 1/16 in. (1.6 mm) of each other.
(10) If rear axle (4) needs alinement, make adjustments as required at adjustable radius rod (10)
at rear axle.
(11) Ensure that four nuts (9) at rear adjustable radius rod (10) are tightened to 110 lb.-ft.
(149 Nm) when alinement is finished.
FOLLOW-ON TASKS:
4-94