TM 9-2330-384-14&P
4-37. SLACK ADJUSTER REPLACEMENT (Con't).
b. INSPECTION
Inspect splines on camshaft (6) and slack adjuster (5) for damage. If camshaft is damaged,
replace (see paragraph 4-36). If splines on slack adjuster are damaged, replace.
c. INSTALLATION
(1)
Install slack adjuster (5) to camshaft (6) with offset actuator rod (1) on side of slack adjuster
facing inside. Install washer (8) and new retaining ring (7).
(2)
Turn adjusting nut (9) on slack adjuster (5) counterclockwise until clevis pin holes in slack
adjuster aline with holes in clevis (4).
(3)
Install two clevis pins (3). Install two new cotter pins (2).
(4) Lubricate grease fitting (10).
FOLLOW-ON TASKS:
Uncage brake chamber spring (see paragraph 4-33).
Couple semitrailer to tractor and check operation of brakes (see paragraph 2-12).
4-109
