TM 9-2330-384-14&P
4-40. BRAKE CHAMBER REPLACEMENT.
THIS TASK COVERS
Installation
b.
Removal
a.
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
Two cotter pins
Conditions
Ref
l
Two locknuts
l
(item 9, Appendix E)
Detergent
l
(Item 21, Appendix E)
Tag marker
Tools:
l
Tool kit, general mechanic's
References:
l
Torque wrench
l
TM 9-2320-273-10 or
l
l TM 9-2320-283-10
REMOVAL
a.
NOTE
If both brake chambers on axle are to be removed, ensure that both brake
chamber springs are caged before proceeding.
(1)
Release all air from front and rear air reservoirs by pulling on air reservoir draincock cable
(see paragraph 2-2).
4-119
