TM 9-2330-384-14&P
4-39. AIR LINES AND FITTINGS REPLACEMENT (Con't).
16.
3/8 in. outside diameter clip
2.
17.
1/2 in. hose assemblies
3/8 in. outside diameter EMERGENCY air line
4.
18.
Brake chamber
5.
7/16 in. inside diameter grommet
19.
Tie-strap
8.
11/16 in. inside diameter grommet
20.
Tee
9.
1/2 in. outside diameter SERVICE air line
21.
Plug
10.
1/2 in. outside diameter clip
22.
Hose separator
11.
90 degree elbow
12.
Relay quick release valve
CAUTION
Use caution when removing or installing air lines (4 or 9) at clips (2 or
10). Clips should be lifted gently and only enough to release air lines.
When securing air lines under clips, a soft-faced hammer should be
used to tap clips back into place. Improper handling of clips will cause
them to break.
If two or more consecutive clips (2 or 10) are missing or damaged, air
l
lines (4 or 9) will not be adequately supported. Damage to air lines may
result.
(3)
If two or more consecutive clips (2 or 10) are damaged or missing, notify direct support
maintenance.
4-117