TM 9-2330-384-14&P
4-56. SPRING REPLACEMENT (Con't).
(2)
Inspect all removed components for damage. If any leaf of spring is damaged, replace
springs on roadside and curbside.
c. INSTALLATION
(1)
Apply a thin coat of grease on inside surfaces of equalizer (6) and frame hanger (2).
NOTE
Rear axle (13) has no spacers (10).
(2)
Position spring (8) over axle (13). If installing spring over a front axle, ensure spring center
bolt fits in hole in spacer (10). If installing spring over a rear axle, ensure spring center bolt fits
in hole in axle spring seat.
(3)
If installing a rear spring (8), ensure spring end is hooked over welded rebound bolt at
equalizer (6).
NOTE
Install rebound bolt locknuts (1 and 5) to outside of frame hanger (2) and
equalizer (6).
(4)
If installing front spring (8), install new rebound bolt (7) and new locknut (5) at equalizer (6).
DO NOT fully tighten locknut.
(5)
Install new rebound bolt (3) and new locknut (1) at frame hanger (2). DO NOT fully tighten
locknut.
4-177