TM 9-2330-386-14&P
CHECKS AND SERVICES - Continued
OPERATOR/CREW PREVENTIVE
MAINTENANCE
B - Before Operation D - During Operation A - After Operation
ITEM TO BE INSPECTED
E q u i p m e n t is not
PROCEDURE: Check for and have repaired,
ready/available if:
filled, or adjusted as needed.
Inspect pins for bent, burned, or
b.
broken condition. Look for foreign
Inspect
for
evidence
c.
of arcing.
NOTE
T h e following must be done with
t h e towing vehicle hooked up in
L a n d i n g Gear
Landing leg binding
a . W h e n cranking landing leg, check
or inoperative.
t h a t each leg moves smoothly and does
P u l l out crank and check high
not bind.
s p e e d o p e r a t i o n . P u s h in crank and check
low speed operation.
I n s p e c t crank, gear box, and landing
b.
inoperative.
C h e c k that
leg feet for secure mounting.
c r a n k h a n g e r s t o w s c r a n k s e c u r e l y . Make
s u r e that opposite leg moves equally with
side being cranked.
NOTE
A helper is needed while checking
the brake lights.
a . L o o k for damage and presence of
b.
If tactical situation permits,
connect intervehicular cable to towing
Operate vehicle light switch
vehicle.
through all settings and check lights.
2-11