TM 9-2330-386-14&P
4-26 LIGHT RESISTORS (CONT).
(5) Connect wire assembly (10) and two connectors (9) to resistors (12)
terminals, as shown in illustration.
(6) Connect wire assembly (3) and two connectors (4) to resistors (8)
terminals, as shown in illustration.
( 7 ) R o u t e w i r e s a w a y f r o m r e s i s t o r s , t o prevent contact between wire
insulation and resistor body.
( 8 ) Guide wires and tubing into frame opening and position nose plate (2)
against frame.
( 9 ) I n s t a l l a n d t i g h t e n f o u r capscrews (1).
( 1 0 ) Connect electrical power a n d c h e c k f o r p r o p e r o p e r a t i o n .
TASK END HERE
4-45
