TM 9-2330-386-14&P
T h e item number is that number assigned to the item as it
(5) ITEM column.
appears in the figure referenced in the adjacent figure number column.
c.FIGURE AND ITEM NUMBER INDEX.
T h i s column lists the number of the figure where the item is
(1) F I G c o l u m n .
identified/located in Section II and III.
T h e item number is that number assigned to the item as it
(2) ITEM column.
appears in the figure referenced in the adjacent figure number column.
T h i s column lists the NSN for the item.
(3) STOCK NUMBER column.
The Federal Supply Code for Manufacturer (FSCM) is a 5-digit
(4) FSCM column.
numeric code used to identify the manufacturer, distributor, or Government agency,
etc., that supplies the item.
I n d i c a t e s the primary number used by the
manufacturer
(5) PART NUMBER column.
(individual, firm, corporation, or Government activity), which controls
the design
and characteristics of the item by means of its engineering drawings,
specifications
standards, and inspection requirements to identify an item or range of
items.
F-5
SPECIAL INFORMATION.
a. U S A B L E O N C O D E . The usable on code
appears in the lower left corner of the
..... . . . . . . " i n
D e s c r i p t i o n column heading. Usable on codes
are shown as "Uoc:
the Description Column (justified left) on
the first line following applicable item
d e s c r i p t i o n / n o m e n c l a t u r e . N o t applicable to
the M871A2 Semitrailer.
Bulk materials required to manufacture items are
b. FABRICATION INSTRUCTION.
listed in the Bulk Material Functional Group of this RPSTL. Part numbers for bulk
materials are also referenced in the description column of the line item entry for
the item to be manufactured/fabricated. Detailed fabrication instructions for items
s o u r c e coded to be manufactured or fabricated are found in Appendix G of this
manual.
Detailed assembly instructions for items source coded
C. ASSEMBLY INSTRUCTION.
to be assembled from component spare/repair parts are found in Chapters 4 and 5 of
t h i s manual. Items that make up the assembly are listed immediately following the
assembly item entry or reference is made to an applicable figure.
Line item entries for repair parts kits appear in a group in Section II
d. K I T S .
(see table of contents).
I t e m s which have the word BULK in the figure column will have
e. INDEX NUMBERS.
a n index number shown in the item number column. This index number is a cross-
reference between the National Stock Number/Part Number Index and the bulk material
list in Section II.
N e x t higher assembly part number shown on the
f. FIGURE TITLE PART NUMBERS.
f i g u r e title and header data is used for manual development and may not be found in
the index.
F-7
