Custom Search
|
|
|
||
 TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
9.
RIGHT BLACKOUT
8.
If 18-26 vdc is present,
STOPLIGHT DOES NOT
replace composite taillight
ILLUMINATE - CONTINUED
assembly (WP 0049 00).
5.
Check to see if 18-26 vdc is
1.
Disconnect 24 vdc
present at 24 vdc
intervehicular cable from
intervehicular cable
trailer (WP 0012 00).
connector pin F.
2.
Set digital multimeter to
ohms.
3.
Connect positive (+) probe
of digital multimeter to 24
vdc intervehicular cable
connector pin F.
4.
Connect negative (-) probe
of digital multimeter to a
known good ground.
5.
Position towing vehicle main
light switch to BO DRIVE
and note reading on digital
multimeter.
6.
Position towing vehicle main
light switch to OFF.
0036 00-62
|
||
|
||
