Custom Search
|
|
|
||
 TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
14. ALL REAR LIGHTS DO NOT
5.
Set digital multimeter to
ILLUMINATE - CONTINUED
ohms.
6.
Connect positive (+) probe
of digital multimeter to
terminal lug TL267
7.
Connect negative (-) probe of
digital multimeter to a known
good ground and note
reading on digital multimeter.
8.
If continuity is not present,
repair wire (WP 0043 00) or
replace electrical cable
assembly (WP 0051 00).
9.
If continuity is present,
replace voltage converter
box (WP 0053 00).
10. Connect connector J255 to
right rear marker light
connector.
11. Install base on vehicle with
four washers and screws.
12. Install lamp in socket.
13. Install lens on base with two
screws.
0036 00-90
|
||
|
||
