Custom Search
|
|
|
||
 TM 9-2330-394-13&P
BRAKE SYSTEM TROUBLESHOOTING - Continued
0037 00
BRAKE SYSTEM - Continued
Table 1. Brake System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
Set digital multimeter to
6. ANTI-LOCK BRAKING
5.
Check to see if continuity is
ohms.
SYSTEM (ABS) DIAGNOSTIC
present between ABS
TOOL DOES NOT OPERATE -
diagnostic test connector pin
CONTINUED
E and ABS ECU DIAGN
connector pin 4.
2.
Connect positive (+) probe
of digital multimeter to ABS
diagnostic test connector pin
E.
3.
Connect negative (-) probe
of digital multimeter to ABS
ECU DIAGN connector pin 4
and note reading on digital
multimeter.
4.
If continuity is not present,
replace ABS control to
diagnostic cable (WP 0072
5.
If continuity is present,
replace ABS ECU (WP 0065
0037 00-31
|
||
|
||
