Custom Search
|
|
|
||
 TM 9-2330-394-13&P
BRAKE SYSTEM TROUBLESHOOTING - Continued
0037 00
BRAKE SYSTEM - Continued
Table 1. Brake System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
Set digital multimeter to
6. ANTI-LOCK BRAKING
4.
Check to see if continuity is
ohms.
SYSTEM (ABS) DIAGNOSTIC
present between ABS
TOOL DOES NOT OPERATE -
diagnostic test connector pin
CONTINUED
D and ABS ECU DIAGN
connector pin 5.
2.
Connect positive (+) probe
of digital multimeter to ABS
diagnostic test connector pin
D.
3.
Connect negative (-) probe
of digital multimeter to ABS
ECU DIAGN connector pin 5
and note reading on digital
multimeter.
4.
If continuity is not present,
replace ABS control to
diagnostic cable (WP 0072
0037 00-30
|
||
|
||
