Custom Search
|
|
|
|
||
|
||
 TM 9-2330-394-13&P
PREVENTIVE MAINTENANCE CHECKS AND SERVICES,
0042 00
INCLUDING LUBRICATION INSTRUCTIONS - Continued
Semiannual PMCS Procedures for Trailer (Field Level) - Continued
Table 10. Preventive Maintenance Checks and Services (PMCS) - Semiannual (Field Level) -
Continued.
ITEM TO BE FIELD-LEVEL MAINTENANCE
EQUIPMENT
ITEM
INTERVAL
MAN-
CHECKED OR PROCEDURE
NOT READY/
NO.
HOUR
AVAILABLE
SERVICED
IF:
2
Semiannual
2.0 -
Wheels, Hubs
LMTVT
4.0 -
MTVT
WARNING
Completely deflate tires before removing from axles if there is obvious damage to wheel
components. Removing tires from damaged wheel components without deflating tires may
cause wheel components to separate. Failure to comply may result in serious injury or death
to personnel.
1. Check wheels for obvious cracks
Cracks are
around lug holes. If cracks are found, found around
repair wheel (WP 0079 00, Wheel
lug holes.
Repair).
More than one
2. Replace any loose or damaged
lugnut or
wheel studs (WP 0077 00, Wheel Stud
wheel stud is
Replacement). Tighten lugnuts (WP
damaged or
missing.
Sequence).
3. Check for grease leaks. If leaks are
Class III leak is
found, repair wheel (WP 0080 00,
evident.
Wheel Bearing/Hub Seal
Replacement).
4. Check if six months has passed since
wheel end hubs (1) have had grease
changed. If grease has not been
changed, perform the following:
WARNING
Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and
gloves; use only in well-ventilated area; avoid contact with skin, eyes, and clothes, and do not
breath vapors. Keep away from heat or flame. Never smoke when using Dry Cleaning
Solvent; the flashpoint for Type I Dry Cleaning Solvent is 100 F (38 C) and for Type II is 138
F (50 C). Failure to comply may result in serious injury or death to personnel.
0042 00-56
|
||
|
||
