Custom Search
|
|
|
||
 TM 9-2330-394-13&P
CLEARANCE AND MARKER LIGHT ASSEMBLIES REPLACEMENT
THIS WORK PACKAGE COVERS:
Removal (Incandescent Model), Installation (Incandescent Model), Removal (LED Clearance Model),
Installation (LED Clearance Model), Removal (LED Marker Model), Installation (LED Marker Model),
Operational Check
INITIAL SETUP:
Maintenance Level
Materials/Parts (Cont.)
Field
Ties, Cable, Plastic (Item 37, WP 176 00)
Adhesive (Item 1, WP 0176 00)
Tools and Special Tools
Nut, Self-Locking (4) (Item 61, WP 0181 00)
Wrench, Torque, 0-300 lb-in. (Item 51,
(Incandescent Model)
Nut, Self-Locking (8) (Item 62, WP 0181 00)
Goggles, Industrial (Item 8, WP 0178 00)
(LED Clearance and Marker Models)
Tool Kit, Genl Mech (Item 37, WP 0178 00)
Materials/Parts
Lockwashers (2) (Item 10, WP 0181 00)
References
(Incandescent Model)
Towing vehicle Operator manual
Lockwashers (4) (Item 41, WP 0181 00)
(Incandescent Model)
Lockwasher (Item 63, WP 0181 00)
Equipment Conditions
(LED Marker Model)
Trailer uncoupled (WP 0012 00).
WARNING
Wear appropriate eye protection when working under trailer due to the
possibility of falling debris. Failure to comply may result in injury to personnel.
CLEARANCE AND MARKER LIGHT REMOVAL (Incandescent Model)
NOTE
Remove plastic cable ties as required.
All clearance and marker lights are removed the same way. Right marker light shown.
Clearance and marker connectors are:
Right front clearance connector ................
J250:TL262
J251:TL263
Left front clearance connector...................
J255:TL267
Right rear clearance connector .................
J256:TL268
Left rear clearance connector....................
Left marker light ......................................
J252:TL264
Center marker light ..................................
J253:TL265
Right marker light ....................................
J254:TL266
0050 00-1
|
||
|
||
