Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
REAR CROSSMEMBER REPLACEMENT - Continued
0108 00
INSTALLATION
NOTE
The rear crossmember is installed the same way on both trailers. The LMTVT shown.
Left and right sides of rear crossmember are installed the same way. Right side shown.
Steps (1) through (4) require the aid of an assistant.
1.
Position rear crossmember (3) on trailer with four bolts (6) and self-locking nuts (7).
NOTE
Perform the following step on trailer S/N 11,438 to 99,999.
Tighten two self-locking nuts (11) to 210-225 lb-ft (285-305 Nm).
2.
NOTE
Perform the following step on trailer S/N 200,001 to 299,999.
Tighten four self-locking nuts (7) to 158-210 lb-ft (214-286 Nm).
3.
4.
Perform step (1) and step (2) or step (3) on left side of rear crossmember (3).
5.
Install two shackles (2) on rear crossmember (3) with two pins (1).
END OF WORK PACKAGE
0108 00-3/4 Blank


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business