Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
ILLUSTRATED LIST OF MANUFACTURED ITEMS - Continued
0179 00
MANUFACTURED ITEMS - Continued
Wheel Bearing Shim Tool Rest
Fabricate the wheel bearing shim tool rest according to the following steps. Refer to the following parts list
for materials.
Part Number
National Stock Number
Description
QQ-T-570
Bar, Metal
a.
Dimensions are in inches (centimeters)
b.
Cut metal bar to 9.0 inches (22.86 cm) long.
c.
De-burr and remove sharp edges from ends of metal bar.
Pneumatic Tubes Fabrication
Cut pneumatic tubes from bulk tubing stock listed in Table 1. Pneumatic Tube Lengths. Use a fine-
toothed hacksaw or suitable cutting device and cut tubing to required length.
Table 1. Pneumatic Tube Lengths.
Tube Part
Bulk Tubing
Cut Length
Number
Part Number
inches
cm
12420062-007
IAW MIL- H -3992, Type 1,
41
104.14
Class 1 (19207)
12420062-009
IAW MIL- H -3992, Type 1,
61
154.94
Class 1 (19207)
12420062-011
IAW MIL- H -3992, Type 1,
100
254
Class 1 (19207)
12420062-013
IAW MIL- H -3992, Type 1,
120
304.8
Class 1 (19207)
12420062-014
IAW MIL- H -3992, Type 1,
58
147.32
Class 1 (19207)
12420062-016
IAW MIL- H -3992, Type 1,
128
325.12
Class 1 (19207)
12420064-006
IAW MIL- H -3992, Type 1,
13.4
33.97
Class 1 (19207)
12420064-007
IAW MIL- H -3992, Type 1,
14.9
37.78
Class 1 (19207)
12443181-001
J517-100R1A (19207)
19.5
49.53
12443181-002
J517-100R1A (19207)
54.5
138.4


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business