Custom Search
|
|
|
||
 TM 9-2330-394-13&P
ILLUSTRATED LIST OF MANUFACTURED ITEMS - Continued
0179 00
MANUFACTURED ITEMS - Continued
Lanyard Assembly P/N 12418763 Fabrication
Make the following lanyard assembly from bulk cable material, sleeves, and tab material and assemble
according to Figure 4. Lanyard Assembly. The following parts list identifies part numbers and lengths of
cut pieces.
Item
Part Number
Material Description
Size (L x W x H, except as
Qty
noted)
1
MIL-W-83420 Type 1,
1/16 in. stranded wire
4 in. (10.2 cm) long
1
Comp B
cable
2
MS51844-22
Sleeve, Wire Rope
.44 in. (1.12 cm) X .18 in. (.46
2
cm) X .27 in. (.69 cm)
3
N/A
Tab, Stainless Steel ASTM
1.25 in. (3.18 cm) X .37 in. (.94
1
A617
cm) X .06 in. (.15 cm)
a.
All dimensions are in inches (centimeters).
b.
Make from bulk cable and flat steel material as identified in parts list.
c.
Drill two 0.19 in. (.48 cm) diameter holes through tab material as shown on Figure 4. Lanyard
Assembly.
d.
De-burr and remove sharp edges.
e.
Bend tab as shown on Figure 4. Lanyard Assembly.
f.
Form loops on cable ends and insert sleeve material over cable on one end of cable and over cable and
through sleeve at other end of cable as shown in Figure 4. Lanyard Assembly.
g.
Crimp two sleeves over cable ends.
|
||
|
||
