TM 9-2350-222-10-2
DRIVE THE VEHICLE (START ENGINE)
1. Read instruction plate (A) completely.
CAUTION
Do not set parking brake if weather is freezing.
NOTE
When pushing brake pedal (B), do not go over
900 psi on pressure gage (C). If more than 900
psi is applied, brake will be very hard to release.
2. Set parking brake:
a. Check that transmission shift lever (D) is in P (park) position.
b. Push brake pedal (B) until pressure gage (C) shows between
750 and 900 psi.
c. Release brake pedal (B). Parking brake will be set.
3. Close crew compartment and engine compartment drain valves:
a. Push lever (E) toward left side of vehicle and pull forward to
close REAR DRAIN VALVE.
b. Push lever (F) down to close FRONT DRAIN VALVE.
2-205
