TM 9-2350-222-10-2
DRIVE THE VEHICLE (START ENGINE) - Continued
4. Check that steering control (G) is in center position. If not, center
control (G).
5. Check that manual fuel shut-off valve handle (H) is pushed down
and locked. If not, push down on valve handle (H). Snap spring
clip (1) over valve handle (H) if spring clip is installed).
6.
Check that FUEL PUMPS switch (K) and HEATER MASTER
switch (L) are set to ON. If not, set both switches to ON.
7. Check that all other control panel (M) switches, except (K) and
(L), are set to OFF.
8. Make sure MAIN PWR switch (P) on amplifier (Q) is set to OFF.
If not, set to OFF or have another crewmember set to OFF.
Change 5 2-206
