TM 9-2350-222-10-2
ZERO SIGHTS (PERFORM INITIAL ZERO) - Continued
Make Sure:
Vehicle is parked on as firm and level ground as possible.
Weapons and sights are boresighted and synchronized (page
Vehicle is prepared for firing (page 2-324 thru 2-372).
Intercom is turned on (page 2-169).
All hatches are closed, commander's (page 2-161), loader's
Indicator tape on replenisher shows one smooth edge and one
rough edge (2-108).
Commander:
1.
Select target according to following requirements:
a.
Target (A) should be at known range as close to 600
meters as possible.
b.
Target (A) should have a clearly defined right angle (B)
for referring sights.
c.
Target should have aiming point (C) surrounded by solid
mass to see where rounds hit.
2.
Identify selected target (A) to gunner.
Driver:
3.
Set MASTER BATTERY switch (D) to ON.
Change 3 2-435
