TM 9-2350-222-10-2
PREPARE FOR FIRING (TURN ON TURRET POWER)
To Prepare Turret for Power Operation:
Make Sure:
MASTER BATTERY switch (A) is set to ON.
Hydraulic powerpack is serviced (page 3-255).
Turret traverse lock is UNLOCKED (page 2-331).
WARNING
Do not apply turret power or operate turret controls until all personnel are
in safe positions and prepared for turret or gun movement.
Do not operate turret in power or manual mode until all personnel are in
proper position, turret ring has been cleared, and shell ejection plate and
all platform guards are in place.
Do not reach into or attempt to enter or exit driver's compartment until
turret power switch is off and turret traverse lock is in locked position.
Crew members out of station are in extreme danger when turret power is
on. Commanders must shut down turret power before allowing crew
members to leave their stations.
Change 4
(2-389 blank)/ 2-390
