TM 9-2350-222-10-2
PERFORM POST-OPERATING PROCEDURES (LOCK CUPOLA LOCKS) - Continued
To Lock AZIMUTH LOCK and AZIMUTH INTERLOCK (Cupola Machine Gun Alined With Main Gun):
1. Turn cupola TRAVERSE CONTROL handle (E) until cupola machine gun is almost alined with main gun.
2. Pull AZIMUTH INTERLOCK handle (A) in direction shown as far as it will go.
3. Release handle (A).
4. Turn cupola TRAVERSE CONTROL (E) handle until pin (B) drops into detent.
TA132709
5. Pull AMIUTH LOCK handle (C) in direction shown. Turn knob (D) until AZIMUTH LOCK locks.
2-570
