TM 9-2350-222-10-2
PERFORM POST-OPERATING PROCEDURES (INSTALL COVERS) - Continued
To Install Cover on AN/VSS-3A Searchlight (If So Equipped):
Make Sure:
ELEV/TRAV POWER switch (A) is set to OFF.
1. Get cover (B) from bustle rack (C).
2. Unfold cover (B).
3. Pull cover (B) down over searchlight (D) as shown.
TA132714
4. Pull drawstrings (E) from either side of cover (B).
5. Tie drawstrings (E) underneath searchlight.
2-575
