TM 9-2350-222-10-2
OPERATE UNDER UNUSUAL CONDITIONS (TOW START) - Continued
3.
Using hammer (E), install two locking pins (C)
on both ends of tow pin (B).
4.
Repeat steps 1 thru 3 on second tow eye of towing vehicle.
5.
Repeat steps 1 thru 3 on both front towing eyes of disabled
vehicle.
WARNING
Always make sure that towing vehicle has
parking brakes on when connecting cables (F).
Connect cables with eye of cable (K) only. Do
not loop cables over hooks.
NOTE
One cable is not long enough for connection
under moldboard. Use two tow cables for
each connection.
6.
Using one cable (F) for each hook (A), place
tow cable eye (K) over tow hooks (A) on both
vehicles.
TA132782
2-643
